[. . . ] 162/210 User Manual x Contents Contents 1 Introduction 1. 1 1. 2 1. 3 We want you to be a satisfied customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Regulation notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 CE Marking (Declaration of conformity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] × 1. 15 % × 1. 41 % × 2. 00 % × 4. 00 % × 0. 25 % × 0. 50 % × 0. 70 % × 0. 81 % × 1. 00 . . . Zoom ratios × 0. 25 and × 4. 00 do not appear if the auto paper function is selected. 3 4 5 Specify the desired copy settings. This will start the copy cycle. 3-50 bizhub 162/210 Before making copies To make copies using a specific zoom setting 3 1 2 3 Position the documents. Press the [, ] and [+] keys to specify the desired zoom ratio The zoom ratio is set in 0. 01 increments. 4 5 6 Specify the desired copy settings. This will start the copy cycle. bizhub 162/210 3-51 3 To make copies using the X/Y zoom function Before making copies 1 2 Position the documents. Press the [X/Y zoom] key until the X/ Y zoom indicator lights up. 3 Press the [, ] and [+] keys to select the desired zoom ratio for the length (X). × 0. 50 % × 0. 70 % × 0. 81 % × 1. 00 % × 0. 50 . . . % Press the [No/C] key, and then perform the operation again from step 2. 4 Press the [Yes] key. 3-52 bizhub 162/210 Before making copies 3 5 Press the [, ] and [+] keys to select the desired zoom ratio for the width (Y). × 0. 50 % × 0. 70 % × 0. 81 % × 1. 00 % × 1. 15 % × 1. 41 % × 2. 00 % × 0. 50 . . . . % Press the [No/C] key, and then perform the operation again from step 2. 6 7 8 9 Press the [Yes] key. This will start the copy cycle. bizhub 162/210 3-53 3 3. 14 Specifying the copy density Before making copies Document type and copy density settings: - TEXT setting: Select the TEXT setting when copying text documents. Select this setting to emphasize contours and reproduce text documents with sharpness. The automatic density level and 9 manual density levels are available. ­ [A] (automatic) density level: The density level is automatically adjusted according to the document being copied. ­ Manual density levels: Select a level between the lightest and darkest settings, depending on the document to be copied. - PHOTO setting: Select this setting when copying documents containing many areas with halftones (intermediate colors), such as photographs. The [A] (automatic) density level cannot be selected if the PHOTO setting is selected. - TEXT/P setting: Select the TEXT/P setting when copying documents containing both text and photos. The automatic density level and 9 manual density levels are available. ­ [A] (automatic) density level: The density level is automatically adjusted according to the document being copied. ­ Manual density levels: In order to prevent the image on the back of newspaper or magazine articles from appearing in the copy, press the [*] key to select a lighter density level. In order to reproduce pale colors in bright areas of the image, press the [)] key to select a darker density level. 2 Note Selecting a density level that is too dark may cause the media color of the document to be reproduced, and selecting a level that is too light may produce a very faint copy. [. . . ] The document pad is dirty. The selected paper size is larger than the document (with a Zoom setting of ×1. 00). The orientation of the document is different from the orientation of the copy (with a Zoom setting of ×1. 00). The copy was reduced to a size smaller than the paper (with a reduced zoom ratio). 8-22 bizhub 162/210 When a message appears 8 8. 6 When copying is not performed correctly Symptom Nothing appears in the display. Enter the user (section) access number according to the instructions in access numbers (p. It takes the machine less than 30 seconds to be ready to make copies after it has been turned on. A user (section) access number has not been entered. Even though the [Start] key is pressed, no copies are made. If the "Error" indicator on the control panel is lit, an error has occurred. [. . . ]